JC360 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Worktime Compliance(%) KPI =====

^ This KPI is able to is able to evaluate users according to whether their working hours have fallen within or outside of the KPI's tolerance rate. ^ 

By default this KPI is available from the selection with the name "Worktime compliance (%)". The KPIs range is +/- 10%, so when the user's daily registered worktime is between 7:12 and 8:48 minutes (for an 8-hour user), the KPI will give a 100% value, if the user's worktime is out of this range, the KPI's value will be 0%. 

However, this tolerance can be changed in the following ways:

==== Tolerance in minutes ====

The tolerance can also be specified in minutes with the following technical name: "NonOvertimeDaysPerTotalDays_-...**m**_...**m**" \\
For example, if we would like to set the tolerance between -20 minutes and +50 mintutes compared to the expected work time for the users, the technical name will looks like this: "**NonOvertimeDaysPerTotalDays_-20m_50m**"

==== Tolerance in percentage ====

The tolerance can be specified in percentage with the following technical name: 
"NonOvertimeDaysPerTotalDays_-...**p**_...**p**" \\
For example, if we would like to set the tolerance between -20 % and +20% compared to the expected work time for the users, the technical name we will use, should look like this: "**NonOvertimeDaysPerTotalDays_-20p_20p**"


==== Mixed tolerance ====
The lower and upper limits can be specified in percentage form and in minute form either. Just need to mix the p and m abbreviations.
For example, if we would like to set the tolerance between -10 minutes and +15% compared to the expected work time for the users, the technical name we will use should look like this: "**NonOvertimeDaysPerTotalDays_-10m_15p**"


==== Operand creation ====
Next step is to create the operand with the appropriate technical name. The operands can be created in the [[https://jobctrl.com/UserCenter/Kpis.aspx|KPI menu]], under the default KPIs.
Here you need to set the technical name and give the operand a friendly name. Most of the time, there is no need to make any other modification, please leave the **Data collection keys** and **Feature requirement settings** empty. Once you've filled in the fields you need, press save.
{{:website:image_3_.png?700|}}

==== KPI creation ====

At the top of the KPIs menu, there is a {{:website:kpis:plus_icon.png?40|}} sign, which you need to press, in order to create the custom KPI. For proper preparation, the pop-up window should look like as the following picture.
{{:website:worktime_compliance_kpi.png?450|}}

**KPI name**: "Worktime Compliance (20%)", because the operand was made with the "NonOvertimeDaysPerTotalDays_-20p_20p" technical name. \\
**KPI description**: "Index used to limit the use of overtime aiming at the achievement of productivity goals within the determined working hours, without using overtime"\\
**Type**: Value\\
**Operands**: Choose the operand, which has been made during the operand creation.\\
**Values as percentage**: yes\\
**Category**: General work time data